FiiO E10K

     

FiiO E10K
USB DAC Headphone Amplifier 

 

Product Highlights

  • Handles PCM Files up to 96 kHz/24bit
  • Selectable Bass Boost
  • Front-Panel 1/8” Headphone Output
  • Coaxial Digital Output
  • 1/8” Line Output
  • Micro USB Recharging
  • Bus Powered
  • Built-in Power Converter Module
  • LED Power Indicator Light & Gain Switch

 

See Overview, Technical Data and Comparison below.

RELATED PRODUCTS

  • The FiiO E10K USB DAC Headphone Amplifier is designed to be a high quality, portable solution to improve your laptop’s audio quality. It features a PCM5102 DAC chip, capable of handling PCM files up to 24-bit, 96 kHz resolution. It is optimized for a low-noise floor when engaged by using a selectable bass boost and low-pass filter allowing you to customization based on your audio tastes.

    DAC Chip

    The internal DAC chip is a PCM5102 which can handle up to 24-bit/96 kHz resolutions.

    Effectively improve the linear internal filter and reducing delay which improves audio quality with no phase shift and reduced silence interval on changing tracks.

    Low Noise Floor

    The unit has been improved to include an optimized low-pass filter and selectable bass which allows for an incredibly low noise floor.

    Amplification Stage

    The E10K features a LMH6643 amp, designed for superior transient response and driving power.

    Portable Design

    A brushed aluminum shell provides compact and durability, perfect for when you’re on the move.

     

  • Model/Number: E10K
    Power Supply: Standard Micro USB port
    Dimensions: (H x W x D): 3.1 x 1.9 x 0.8" (79.0 x 49.1 x 21.0 mm)
    Weight: 2.8 oz (78 g)
    Output Power: 200 mW @ 32 Ω
    Sample Rate: Maximum of 24-bit/96 kHz supported
    Signal to Noise Ratio: ≥108 dB
    Digital Output: 1x coaxial digital output, stereo PCM format
    Frequency Response: 20 Hz to 20 kHz
    Impedance: Recommended Headphone Impedance: 16 to 150 Ω

    Frequency Response diagram of curves

    Red/Blue cure: Bass off
    Yellow/Green: Bass on

    e10k-d-1

  • Model NameQ1K1E10KALPEN 2-E17K
    General Specifications
    Color AvailableBlackTitaniumBlackBlack
    Dimensions97 x 56 x 13.1 (mm)50 x 0.8 x 0.3 (mm)49.1 mm×80 mm×21 mm104.1 x 62.2 x 12.8 (mm)
    Weight100 g11.3 g78 g110 g
    Analog Audio inputMicro USBMicro USBMicro USB3.5 mm stereo Jack
    Digital Audio inputN/AN/AN/AMicro USB/Coaxial/3.5 mm jack(COAXIAL adapter attached)
    Headphone output3.5 mm Stereo Jack3.5 mm Stereo Jack3.5 mm Stereo Jack3.5 mm Stereo Jack
    Line Output3.5 mm Stereo JackN/A3.5 mm Stereo JackDock(Micro USB)/3.5 mm Line Out port
    Headphone Impedance Range16~150 Ω16 to 100 Ω16~150 Ω16~150 Ω
    Volume ControlTOCOS Potentiometer N/AALPS Potentiometer Digital Volume Control (0-60)
    Bass Adjust0/5 dBN/AYESYES
    Treble AdjustN/AN/AN/AYES
    Balance AdjustN/AN/AN/A5 dB
    GAIN Control-7dB/4.5dB (AUX IN)
    -3.5dB/8dB (USB IN)
    N/AN/A0/6/12dB
    Line Out BypassYESN/AN/AYES
    Audio Performance (DAC Section)
    USB Sample Rate Support32/44.1/48/96 kHz (16/24 bit) Max 96kHz/24bit supportedN/A32/44.1/48/96 kHz (16/32 bit)
    DSD 2.8 MHz Supported
    SPDIF Sample Rate SupportN/AN/AN/A32/44.1/48/96/192 kHz (16/24 bit)
    THD+N<0.0045% (10 kΩ/1 kHz) (LO) <0.01% (1 kHz)<0.006% (1 kHz)<0.003% (1 kHz)
    SNR≥107dB ≥100dB>105 dB >110 dB
    Dynamic Range>95 dB N/AN/A>102 dB
    Line Out Level>1.48 Vrms N/AN/A>1.5 Vrms
    Output Power1>190 mW (32 Ω/THD+N<1%) >75 mW(16Ω/THD+N<1%)200 mW (32 Ω/THD+N<1%)> 220 mW (32 Ω)
    Output Power2>75 mW (150 Ω/THD+N<1%) >35 mW(32Ω/THD+N<1%)N/A>290 mW (16 Ω)
    Frequency Response20 Hz~20 kHz20 Hz~20 kHz20 Hz~20 kHz20 Hz~20 kHz
    Output impedance<0.3 Ω ≤ 1 Ω<1.04 Ω <0.3 Ω
    Crosstalk≥75dB (1 kHz) ≥70 dB (1 kHz)≥70 dB (1 kHz)>75 dB (1 kHz)
    MAX GainN/A1.2 dB1.6 dB (GAIN=L)
    8.8 dB (GAIN=H)
    >12 dB
    Peak Output Voltage7.2 Vp-p3.25 Vp-p7.39 Vp-p>7.8 Vp-p
    MAX output Current>75 mA 35.93 mA81.6 mA>115 mA
    Input Overload4.3 Vrms N/AN/A4 Vrms
    Power and Battery
    Power/ChargerRecommend DC5V 1AUSB on PCrecommend DC5V 500mARecommended DC5V 1A
    Charging DisplayYESN/AN/AYES
    Battery Level displayN/AN/AN/AYES
    Capacity1400 mAhN/AN/A1500 mAh
    Charge Time>30 h N/AN/A>15 h
    Battery Life≤4 h N/AN/A≤ 220 min